Results 1 to 9 of 9

Thread: WK Folding Trivet

  1. #1
    Scout Bush Class Intermediate Certified Whittler Kev's Avatar
    Join Date
    Sep 2010
    Location
    March, UK
    Posts
    274
    Thanks
    99
    Thanked 900 Times in 147 Posts

    Talking WK Folding Trivet

    This is the prototype . I prefer to just coat it in vegetable oil so it seasons with use



    You can fold it flat



    or take it to bits (3 bolts) - Don't worry the legs and sides that join are marked with the same number of dots (either 1, 2 or 3) - It will have new bolts. I just had these to hand



    and it weighs in at..................about 550grams (1lb 1/4 in old money) and its not even titanium



    though it has a 17cm side length


    [/b]
    [b]

    I can add 2 cross bars but it adds to the length obviously

    Opps forgot tosay it will hold a tree hehe

    Hope you like it
    Last edited by Whittler Kev; 06-16-2012 at 03:44 PM.

  2. The Following 7 Users Say Thank You to Whittler Kev For This Useful Post:


  3. #2
    Scout wingryder's Avatar
    Join Date
    May 2012
    Location
    28.36n, 81.26w
    Posts
    250
    Thanks
    17
    Thanked 66 Times in 42 Posts

    Default

    What a great idea. I gotta give that a try, I've been lookingnfir somethng like this to accompany my coke can stove. I was looking for a way to use curtain rod holders in a similar fashion.

    Thanx for the fresh spark.

  4. #3
    Guide Supporter
    Bush Class Basic Certified
    red elm's Avatar
    Join Date
    Oct 2010
    Location
    turned around but not lost
    Posts
    1,375
    Thanks
    3,034
    Thanked 2,797 Times in 610 Posts

    Default

    pretty slick

  5. #4
    Elder Bush Class Basic Certified
    Administrator
    Sgt. Mac's Avatar
    Join Date
    Dec 2008
    Posts
    41,782
    Thanks
    53,848
    Thanked 37,659 Times in 10,189 Posts

    Default

    Very slick
    Nie pogrywaj ze mna

  6. #5
    Scout Bush Class Intermediate Certified Whittler Kev's Avatar
    Join Date
    Sep 2010
    Location
    March, UK
    Posts
    274
    Thanks
    99
    Thanked 900 Times in 147 Posts

    Default

    Do this welded folding one



    and this welded folding one



    as well
    Last edited by Whittler Kev; 06-18-2012 at 03:22 PM. Reason: Wrong pic added

  7. The Following 2 Users Say Thank You to Whittler Kev For This Useful Post:


  8. #6
    Scout
    Join Date
    Mar 2012
    Location
    Melbourne Australia
    Posts
    876
    Thanks
    46
    Thanked 988 Times in 417 Posts

    Default

    Been thinking along similar lines myself recently.
    I was toying with a rectangular idea made from similar base material (flat 1/8" x 1/2" wide strap) with a frame that 'slots' together & then also has legs that slot in to support it. The side rails I was thinking of also cutting some smaller slots in to allow stainless rods to be placed for grilling upon.
    The idea was that the whole contraption could be easilly assembled/disassembled via that 'slotting' arrangement so it could be easilly storred in a leather pouch/roll. Just pull the vairous pieces of flat strap & grill rods out of the pouch & 'slot' the lot together.

    Hmmm, have to look into that one soon I think.
    Last edited by Bartnmax; 06-18-2012 at 05:47 PM.

  9. #7
    Scout Bush Class Intermediate Certified Whittler Kev's Avatar
    Join Date
    Sep 2010
    Location
    March, UK
    Posts
    274
    Thanks
    99
    Thanked 900 Times in 147 Posts

    Default

    Similar to this one I made (although rectangular)?






  10. The Following User Says Thank You to Whittler Kev For This Useful Post:


  11. #8
    Scout Bush Class Intermediate Certified
    Supporter
    SwampYankee64's Avatar
    Join Date
    Feb 2013
    Location
    Southeastern MA
    Posts
    734
    Thanks
    2,175
    Thanked 3,373 Times in 609 Posts

    Default Thought I would throw mine in the mix

    This was my project for bush basic improvised metal cooking impliment. I will have to file down the edges some more, but I think it will work pretty well. Each arm measures 8" and the legs are 4". I made it all out of one piece of 1 1/4" x 1 1/4" angle steel. I like WK's idea about seasoning it with veggie oil. I used 3/4" hex bolts with a 1/4" shank, double flat washers and a lock behind the wingnut. 7 bolts total.
    Attachment 70638Attachment 70639Attachment 70640

    s/f
    Buzz

  12. The Following User Says Thank You to SwampYankee64 For This Useful Post:


  13. #9
    Tracker Jandar's Avatar
    Join Date
    Oct 2010
    Location
    netherlands
    Posts
    29
    Thanks
    35
    Thanked 56 Times in 14 Posts

    Default

    Quote Originally Posted by Whittler Kev View Post
    Similar to this one I made (although rectangular)?





    So now i know where grilliput (http://www.grilliput.com/) stole it's idea ;-)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •