Cold Steel Kukri

Discussion in 'Reviews' started by Merc., Jan 8, 2013.

  1. Merc.

    Merc. Tracker

    Blog Posts:
    0
    Joined:
    Dec 4, 2012
    Messages:
    48
    Likes Received:
    0
    Hello guys. I recently picked up a cold steel kukri from my local surplus shop. Thought I'd write up a review. Here are is my thoughts:

    The blade:

    It looks cool! I always like the shape of the kukri and wanted to try it out. I noticed write away this thing was extremly dull. I tried it out on some brush and small saplings and I have to say, I wasn't impressed. It could barely clear brush. Small saplings (like even dime size thick) took a few chops to cut through. It was like cutting with a stick. Tried chopping on a 2x4, same results, unimpressed. My Trusty Condor Rodan was almost surpassing this 13 inch kukri.

    After test, I made my way to the bench vise. I locked it in and broke out the file. Before even sharpening I noticed the edge was almost flat... The grind didn't make a fine edge in the least bit. I began filing and got the nearer part (to the handle) sharp pretty quick. The chopping section, not so much. For some reason it took alot more filing. You can probably make out in the picture how much more paint was worn off there. It took a while.

    After sharpening, I was blown away. It made such a difference. It slice through the brush like hot knife in butter and went through saplings just as easy (one slice infact). I went to the 2x4. It ate it whole. It kukri proved true and sent chips flying.

    The Sheath:

    I'll come right out and say, this thing sucks. I guess for $27.95 though, I can't complain. I'd spend a few extra bucks for a decent leather sheath in this package. The nylon is "ballistic" nylon, but I don't see anything ballistic about this thing.

    The Handle:

    It fits decent in the hand, but I found the rear knobby on the handle dug into the padding on my lower palm. So I sanded it down and it works nicely now.

    Overall:

    I really like the machete now that I have it sharpened up and modded to taste. It's definitely worth what I paid and I definitely don't regret it. Its a great machete as long as you're willing to do a little modding. If your thinking about it, don't hesitate. Just be prepared, it comes dull.

    Thanks for reading,
    Merc.

    Only picture I have at the moment. I'll be sure to upload more sometime soon.
    image.jpg
     
    Last edited: Jan 8, 2013
  2. leverett

    leverett Tracker

    Blog Posts:
    0
    Joined:
    Dec 28, 2012
    Messages:
    71
    Likes Received:
    0
    Ive got one of these but dont carry it anymore it seems like the steel is really soft so it stays in the garage as a beater. But yeah its a good machete glad to see someone haveing better luck with theres
     
  3. captainamer

    captainamer Scout

    Blog Posts:
    0
    Joined:
    Apr 13, 2012
    Messages:
    606
    Likes Received:
    2
    Location:
    KC MO
    I have this and the larger one. They dont stay sharp. They spend lots of time in basement.
     
  4. Derek2002

    Derek2002 Tracker

    Blog Posts:
    0
    Joined:
    Dec 24, 2012
    Messages:
    141
    Likes Received:
    9
    Location:
    Jackson county, Ky
    I recently traded for a rubber handle one (I have heard the new handles are plastic but don't know for sure). I haven't had a chance to try mine out yet. I was planning on sharpening it first as it still has the original butter knife edge lol. Glad to see that you like yours.
     
  5. Merc.

    Merc. Tracker

    Blog Posts:
    0
    Joined:
    Dec 4, 2012
    Messages:
    48
    Likes Received:
    0
    Yeah, I have noticed the steel to be a bit on the soft side. I think its like 1055 or something like that. Around here there aren't any rocks so the only real thing i could imangine dinging the blade on is something man made maybe a hard knot. I can see how it'd be problems in rocky environment per say. Im sure they used the lower quality steel to save money as it was only 25 bucks.

    It does seem to loose an edge after awhile as well. I'm sure I'm gonna have to kep a pocket file around when in the woods.
     
  6. hkgonra

    hkgonra Scout

    Blog Posts:
    0
    Joined:
    Jan 27, 2012
    Messages:
    201
    Likes Received:
    4
    Location:
    Bartlett,TN
    Got mine for $11 from Cold Steel a couple years ago and have been happy with it.
     
  7. pommie

    pommie Supporter Supporter

    Blog Posts:
    0
    Joined:
    Sep 11, 2009
    Messages:
    1,362
    Likes Received:
    350
    Location:
    Lake county, IL
    I have had one of these for years and i have to say it was a good buy at the time, the only differance this i know is that mine is marked as a carbon v and it holds an edge for ever with just the odd touch up.

    try looking for them on evil bay, mine i only paid $20 10 years ago though.

    thanks
     
  8. GrandLarsony

    GrandLarsony Guide

    Blog Posts:
    0
    Joined:
    Jun 15, 2012
    Messages:
    1,396
    Likes Received:
    2
    Location:
    Rochester, NY
    Got one from a forum member for $10 shipped (had a busted handle, so they're clearly not indestructable).

    Rehandled mine in some random hard-as-rock wood. The original wasn't a good fit for my hand at all, but this one works very well.

    Definitely carry a file. These don't hold any edge whatsoever.

    I don't usually carry a machete in the woods so this one pretty much sits in my batcave gear pile. It may get used in the yard a few times per year, or on certain trips.
     

    Attached Files:

  9. kyak

    kyak Tracker

    Blog Posts:
    0
    Joined:
    Nov 13, 2012
    Messages:
    191
    Likes Received:
    0
    Location:
    Southern Illinois
    These come dull when purchased. Cold Steel says its utility sharp....ok
    I re profiled my edge with 25 degree bevel and it functions well! It's a great bang for the buck machete!!! Mine get used a lot and they serve me well to process wood or clear saplings...
    I'm saving up to buy the CS Ghurka Kukri! I will review it when I get it and post it up!
     
  10. tiny80022

    tiny80022 Hobbyist Hobbyist

    Blog Posts:
    0
    Joined:
    Jul 24, 2009
    Messages:
    1,500
    Likes Received:
    142
    Location:
    colorado
    My cousin bought one from sportsmans warehouse for $20. It was about as sharp as a bowling ball. After 5 minutes on the knife grinder it would shave hair and cut through brush and branches with ease, he loves it.
     
  11. Sodak

    Sodak Scout

    Blog Posts:
    0
    Joined:
    Dec 20, 2010
    Messages:
    417
    Likes Received:
    0
    Location:
    Colorado
    Just to be clear, this is a Kukri machete, not the kukri. World of difference between the two.
     
  12. The Stumpy One

    The Stumpy One Supporter Supporter Bushcraft Friend

    Blog Posts:
    0
    Joined:
    Sep 15, 2012
    Messages:
    2,348
    Likes Received:
    110
    Location:
    Greater Chicago area
    Yep.
     

Share This Page