WTS - Culling the knife herd

Discussion in 'Supporter's Trade Blanket' started by halo2, Jul 30, 2017.

  1. halo2

    halo2 Supporter Supporter

    Blog Posts:
    0
    Joined:
    Jan 24, 2010
    Messages:
    751
    Likes Received:
    197
    forgecraft.jpg

    2 Forgecraft High Carbon knives. Bought to modify projects but they've sat too long. Boning pattern is 11" overall, 4 1/2"+ handle. Patina but in good shape. Butcher pattern is 11 3/4" with a 7" blade. Note there's a chip taken out about 2" from the tip that's about 3/8" long and 1/16" deep approximately. No pitting on either. Both are 0.087" thick approximately measured at the handle. $15 shipped CONUS with tracking for the pair.

    casexx.jpg
    Case Chef knife. In great shape. Marked 200-10" Case XX Chromium. Edge is good but taped up for storage. I drew a mod pattern on it in Sharpie. That'd come off with alcohol. 0.117" thick measured at the handle. $15 shipped CONUS with tracking.

    ontario.jpg

    US Ontario Knife Chef pattern. Marked 730-00-22-7771. 12" blade and 17" overall. Appears to be high carbon possibly chromed for steel protection.Lots of patina, no pits. About 0.180" thick measured at the handle. This is a monster that could function as a small machete. $15 shipped CONUS with tracking.

    nighthawk.jpg

    Buck 650C Nighthawk with Cordura sheath. Factory edge. I've owned it for years but never used it. SOLD

    folders.jpg

    Schrade Walden Parachutist's knife. I'm guessing, but am not sure it's 1960s-1970s vintage. Automatic so you're responsible for knowing your local laws. Snaps open OK. It's a slipjoint. Button lock works. Edge has been worked. Chute cutter has some edge rolling. A bit of play in the blade that could probably be improved by peening. Neat piece of history. SOLD

    Remington R1613 marked 1987 and Remington UMC made in USA. I believe it's the factory edge. Patina on the backspring. $30 shipped CONUS with tracking.

    Cold Steel Voyager with tanto tip. 4" blade. A little wear with a very slight chip/roll near the point. SOLD
     
    Last edited: Aug 13, 2017
    actichy likes this.
  2. IA Woodsman

    IA Woodsman Overwatch Moderator Staff Member Super Moderator Vendor Bushclass Instructor

    Blog Posts:
    0
    Joined:
    Oct 23, 2008
    Messages:
    9,324
    Likes Received:
    6,767
    Location:
    South West IA
    I will take the parachute knife
     
    actichy, VanGo, Phantom X and 2 others like this.
  3. barn yard commando

    barn yard commando Supporter Supporter

    Blog Posts:
    0
    Joined:
    Oct 5, 2010
    Messages:
    431
    Likes Received:
    236
    Location:
    Kansas
    I will take the buck nighthawk. Pm me for PayPal
     
  4. halo2

    halo2 Supporter Supporter

    Blog Posts:
    0
    Joined:
    Jan 24, 2010
    Messages:
    751
    Likes Received:
    197
    Bump
     
  5. MandrakeRoot

    MandrakeRoot Scout

    Blog Posts:
    0
    Joined:
    Sep 9, 2016
    Messages:
    353
    Likes Received:
    846
    Dang! That nighthawk!! I haven't seen one of them in a coons age:)
     
  6. halo2

    halo2 Supporter Supporter

    Blog Posts:
    0
    Joined:
    Jan 24, 2010
    Messages:
    751
    Likes Received:
    197
    bump
     
  7. Del

    Del Tracker

    Blog Posts:
    0
    Joined:
    Oct 27, 2016
    Messages:
    10
    Likes Received:
    36
    can you send me a pic of the chip/roll issue on the cold steel? thanks
     
  8. Sharpdogs

    Sharpdogs Scout

    Blog Posts:
    0
    Joined:
    Oct 24, 2009
    Messages:
    547
    Likes Received:
    80
    I will take the cold steel voyager. Please pm me payment information.
     
  9. halo2

    halo2 Supporter Supporter

    Blog Posts:
    0
    Joined:
    Jan 24, 2010
    Messages:
    751
    Likes Received:
    197
    Apologies
    Del, looks like Sharpdogs has it.
     
  10. halo2

    halo2 Supporter Supporter

    Blog Posts:
    0
    Joined:
    Jan 24, 2010
    Messages:
    751
    Likes Received:
    197
    Apologies Del, looks like Sharpdogs has it.
     
  11. Del

    Del Tracker

    Blog Posts:
    0
    Joined:
    Oct 27, 2016
    Messages:
    10
    Likes Received:
    36

Share This Page